A & R Sheldon Mail Order Tools Draper Clearance Items

Draper Standard Pattern 5/8" Dia Auger Bit Ref: dr199906757
10.75" long with 4" cutting edge.
Only two available.
Price: £5.00 (£5.88 Including VAT at 17.5%)

Quantity:

Draper Stopmate Ref: dr59870
Prevents Damaging Bumpers & Bodywork. Trouble with Parking? Can be permanently fixed to floor using suitable fixings (Not Supplied) to assist driver in garage parking to avoid damage to bumpers and bodywork. Simply position the stopmate and secure to the floor. Then drive slowly over the first hump into your parking position - i.e. with the wheel between the two humps.
Ideal for cars, vans and light commercial vehicles.
More than ten available.

Price: £3.00 (£3.53 Including VAT at 17.5%)

Quantity:

Draper Double Tool Pouch Ref: dr72921
Heavy duty split suede leather, double stitched. Comprising two large pockets, two medium pockets, six pencil pockets, two hammer loops, tape measure holder, holder for pliers and 50mm wide belt with 'quick release buckle.
20% Off list price.
Only one available.
Price: £18.48 (£21.71 Including VAT at 17.5%)

Quantity:

Draper 300mm Flexible Delivery Tube Ref: 12750
High pressure thermoplastic tube,threaded 1/8" BSPT at both ends.
Sfe working pressure 400bar/5800psi.
20% off list price.
Only seven available.
Price: £3.20 (£3.76 Including VAT at 17.5%)

Quantity:

Draper Hook on Connector Ref: 57875
Heavy duty hook or slide-on connector with plated steel body,threaded 1/8" BSP.
Safe working pressure 80bar/1150psi.
20% off list price.
Only eight available.

Price: £3.45 (£4.05 Including VAT at 17.5%)

Quantity:

Draper Hydraulic Connector Ref: 57859
Four jaw plated steel connector,threaded 1/8" BSPT.
Safe working pressure 680bar/9800psi.
20% off list price.
Only five available.
Price: £1.95 (£2.29 Including VAT at 17.5%)

Quantity:

Draper Cable Oiler Ref: 51859
Designed for lubricating Multi-strand cables used on motor vehicles,cycles etc.
Lubricates cable in situ.
Use with any oil can with correct connecton.
Full instructions supplied.
Only four available.
Price: £5.00 (£5.88 Including VAT at 17.5%)

Quantity:

Draper Door Panel Removing Tool Ref: dprt
Spring steel.
PVC Handle.
Only one available.
Price: £2.50 (£2.94 Including VAT at 17.5%)

Quantity:

Draper Spark Plug Tester Ref: sgt
Checke for ignition spark in non-start conditions.Suitable for petrol engined vehicles.
Only two available.
Price: £3.00 (£3.53 Including VAT at 17.5%)

Quantity:

Draper Bolt Cutter Ref: drapbc
Suitable for cutting high tensile material up to 40HRC.
Jaws hardened and tempered to HRC58-62 to give long
life and good cutting capability. Centre cut jaw pattern.
Plastic grips on handles.
Less than half price.

size

Quantity:

Draper 1/4" drive Hex A/F socket Ref: dr14hsaf
Only sizes listed available.

size

Quantity:

Draper Expert 1/4" drive Extension bar Ref: dr14eb
Only sizes listed available.
20% Off list price.

size

Quantity:

Draper 1/4" drive BA socket Ref: dr14ba
Only sizes listed available.

size

Quantity:

Draper 1/4" Drive BA Set 6 Ref: baset
Sizes in set:- 1BA,3BA,4BA,5BA,6BA and 7BA.
Price: £2.50 (£2.94 Including VAT at 17.5%)

Quantity:

Draper Expert 1/4" drive TX-STAR sockets Ref: dr14t
Compatible with Torx fixing systems.
Only sizes listed available.
20% Off list price.

size

Quantity:

Draper 1/4" Drive Reversible Ratchet Ref: DR37848
Chrome vanadium steel
45 tooth
Superfine action

List price £11.52 plus VAT
Special Offers are Subject to Availability
Price: £5.00 (£5.88 Including VAT at 17.5%)

Quantity:

Draper Expert 3/8" drive TX-STAR sockets Ref: dr38t
Compatible with Torx fixing systems.
Only sizes listed available.
20% Off list price.

size

Quantity:

Draper Expert 3/8" drive Bi-Hex metric socket Ref: dr38s
Size 18mm only available.
Only one available.
20% Off list price.
Price: £1.92 (£2.26 Including VAT at 17.5%)

Quantity:

Draper Expert 3/8" drive BA socket Ref: dr38ba
Only sizes listed available.

size

Quantity:

Draper Expert 3/8"Drive BA Set 4 Ref: 38baset4
Sizes in set, 6BA, 4BA, 2BA and 0BA.
Price: £1.75 (£2.06 Including VAT at 17.5%)

Quantity:

Draper Expert 3/8" drive Hex Spark Plug socket Ref: dr38sp
Only 10 mm size available.
Only five available.
20% Off list price.
Price: £3.63 (£4.27 Including VAT at 17.5%)

Quantity:

Draper Expert 3/8" drive Bi-Hex deep metric sockets Ref: dr38m
Only sizes listed available.

size

Quantity:

Draper 3/8" Drive Metric bi-hex sockets Ref: drm38
Only sizes listed available.

size

Quantity:

Draper Set of 10 A/F Sockets 3/8" drive Ref: dr51340
Sizes in set.
5/16, 3/8, 7/16,1/2, 9/16, 5/8, 11/16, 3/4, 13/16, and 7/8" A/F
Price: £5.00 (£5.88 Including VAT at 17.5%)

Quantity:

Draper Set of 14 Metric Sockets- 3/8" drive Ref: dr51339
Sizes in set
6mm (Elora-hex), 7mm, 8mm, 9mm (Elora-hex), 10mm (1/4" Drive-hex), 11mm (Elora), 12mm, 13mm, 14mm, 15mm (Elora), 16mm, 17mm, 18mm & 19mm
Variety of Style All from Draper
Special Offers are Subject to Availability
Price: £6.38 (£7.50 Including VAT at 17.5%)

Quantity:

Draper 15 Piece Metric Socket Set 1/2" Drive Ref: DR12SS
11 Sockets 10mm to 22mm
125mm and 250mm extension bars
Spark plug socket 14mm
Reversible ratchet
In blow moulded storage case
Special Offers are Subject to Availability
Price: £15.00 (£17.63 Including VAT at 17.5%)

Quantity:

Draper 3/8" Drive TORX-STAR Socket Bits-Set of 4 Ref: txset4
Sizes in set
T20 Short, T20 Long, T25 Long & T30 Long
Special Offers are Subject to Availability

Price: £2.98 (£3.50 Including VAT at 17.5%)

Quantity:

Draper Expert 1/2" drive Bi-Hex Spark Plug socket Ref: dr12sp
Only sizes listed available.
20% Off list price.

size

Quantity:

Draper Expert 1/2" drive Bi-Hex deep metric sockets Ref: dr12m
Only sizes listed available.
20% Off list price.

size

Quantity:

Draper Expert 1/2" drive Hex Spark Plug socket Ref: dr12sph
Size 10mm only available.
Only three available.
20% Off list price.
Price: £3.63 (£4.27 Including VAT at 17.5%)

Quantity:

Draper 3/8" & 1/2" Drive Locking Extensoin Bars Ref: 38-12-lock-ext
Set of 5
3/8" Drive 75, 150 & 300mm Long
1/2" Drive 125 & 250mm Long
Special Offers are Subject to Availability
Price: £10.64 (£12.50 Including VAT at 17.5%)

Quantity:

Draper Expert 1/2" drive A/F socket Ref: dr12saf
Size 1-1/4" only available.
Only five available.
20% Off list price.
Price: £4.59 (£5.39 Including VAT at 17.5%)

Quantity:

Draper Set of 8 Short & Long Metric Sockets Ref: 8setmm
Sizes in set
11mm 1/2" Drive
11mm 1/2" Drive Impact
15mm 1/2" Drive Long
16mm 3/8" Drive
16mm 3/8" Drive Long
18mm 3/8" Drive
20mm 1/2" Drive long
22mm 3/8" Drive

Only eleven left.

Price: £2.98 (£3.50 Including VAT at 17.5%)

Quantity:

Draper Expert 1/2" Drive Impact Sockets-Set of 3 Ref: 12i
Sizes in set
3/8, 13/16 & 1 1/16"

Only five available.

Price: £0.85 (£1.00 Including VAT at 17.5%)

Quantity:

Draper Expert 1/2" Drive Impact Sockets Ref: dri
Only sizes listed available as singles.

size

Quantity:

Draper Expert 3/4" Drive A/F Sockets Ref: dr34af
Draper Expert Bi Hex A/F Sockets
Only sizes listed avsilable.

size

Quantity:

Draper Expert Converters Ref: drapconv
Only sizes listed available.
20% Off list price.

size

Quantity:

Draper Hub nut socket Ref: 56060
Size 1 5/16" A/F.1/2" Drive.
For use on hub nuts fitted to Rover Mini, Austin Allegro Maxi, Morris/Austin 11/1300 and steering column nuts on Rover Mini vehicles.
Only two available.
Price: £5.00 (£5.88 Including VAT at 17.5%)

Quantity:

Draper 12 piece needle file set Ref: 36325
12 piece 140mm needle file set comprising flat hand,flat taper, joint, taper round,half round, square, three square, oval, crossing, crochet,barrette and knife with moulded plastic handles.
In plastic storage wallet.
Only one available.

Price: £7.05 (£8.28 Including VAT at 17.5%)

Quantity:

Draper 600mm spirit level Ref: 30611
600mm "V" groove spirit level.
Suitable for pipework.Accuracy: 1mm per metre.
Only two available.
Price: £4.00 (£4.70 Including VAT at 17.5%)

Quantity:

Draper E11 Tx-Star Soc.1/2"Dr. Ref: 58983

Price: £1.00 (£1.18 Including VAT at 17.5%)

Quantity:

Draper rubber wheel chocks Ref: 54500
Suitable for use with cars, light vans, trailers etc,
Only one available.
Price: £7.00 (£8.23 Including VAT at 17.5%)

Quantity:

Draper magnetizer and demagnetizer Ref: e-63768
Ideal for use on screwdrivers and many other metal components.
Only one available.
Price: £1.75 (£2.06 Including VAT at 17.5%)

Quantity:

Draper angular gauge. Ref: 52385
Designed to be used between a 3/8" square drice torque wrench and socket to accurately reproduce degrees of turn.
Only one available.
Price: £3.50 (£4.11 Including VAT at 17.5%)

Quantity:

Draper cylinder hone Ref: 56244
For honing out brake or small bore engine cylinders 25-57mm capacity.
Suitable for use with variable speed electric or air powered tools.
220 grade.
Only one available.
Price: £8.00 (£9.40 Including VAT at 17.5%)

Quantity:

Draper stone set Ref: 56247
Draper replacement stone set for brake cylinder hone 220 grade.
For use with brake cylinder hone.Item 56244.
Only one available.
Price: £4.00 (£4.70 Including VAT at 17.5%)

Quantity:

Draper Bit holding socket Ref: 31998
Draper 1/4" drive Bit holding socket.
Price: £1.50 (£1.76 Including VAT at 17.5%)

Quantity:

Draper T Type Tap Wrench Ref: drapttw
Draper T Type Tap Wrench.
Size 1 3 - 4mm
Size 2 4 - 6.8mm

size

Quantity:

Draper Gribbit bit holder set Ref: g-bit31976
Six 1/4" x 25mm insert bits and 1/4" (F) x 1/4" (M) adaptor contained in gribbit holder/handle.
Contents 2 *Pozidriv®/Supadriv® bits: No.1 and 2 and 2 flat head bits.
Only one available.
Price: £5.00 (£5.88 Including VAT at 17.5%)

Quantity:

Draper circuit tester Ref: 12578
Low voltage car electric circuit tester.
Testing range 6-24 volts D.C.
With test light.
Only one available.
Price: £2.00 (£2.35 Including VAT at 17.5%)

Quantity:

Draper 8" Vernier Depth Gauge Ref: draper-vernier-depth
For measuring depth of holes,slots and recesses
Manufactured from stainless steel with an engraved rule
Calibrated 0.02mm with 100mm wide base and locking screw
Supplied in plastic case

ONLY ONE REMAINING

Price: £18.50 (£21.74 Including VAT at 17.5%)

Quantity:

Draper Valve Spring Compressor Ref: DRSC
Made from selected steel and zinc plated
75mm - 175mm
Capacity 150mm Throat
RRP £23.22 + VAT
Special Offers are Subject to Availability
Price: £17.50 (£20.56 Including VAT at 17.5%)

Quantity:

Draper 11 Piece Metric Combination Spanner Set Ref: DRSET11MC
Chrome vanadium/chrome plated and mirror polished
Sizes:-
8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 16mm, 17mm, 18mm and 19mm

Supplied complete with wall mounting storage rack
RRP £28.68 +VAT
Special Offers are Subject to Availability
Price: £17.50 (£20.56 Including VAT at 17.5%)

Quantity:

Draper Combination Spanner A/F Ref: caf
Chrome vanadium.
Only size 1-3/8 A/F available.
Four available.
Price: £9.00 (£10.58 Including VAT at 17.5%)

Quantity:

Draper Expert Ratchet Adaptor Ref: DRRA
3/8" drive
Turns tee and extension bars into ratchet
RRP £12.78 +VAT
Special Offers are Subject to Availability
Price: £8.50 (£9.99 Including VAT at 17.5%)

Quantity:

Draper Torque Wrench Ref: drap34570
Draper 3/8" drive torque wrench 10-80nm/88.5-708lb-in. in blow mould storagel case.

Reversible ratchet head.
The Nm and lb-in scales are engraved on the barrel of the wrench.
The micrometer type sleeve allows accurate preset torque values to be set.
Produces an audible click and slight release of tension when torque reached.
overall length 280mm

List price £38.84 plus VAT
ONLY 1 AVAILABLE

Price: £30.00 (£35.25 Including VAT at 17.5%)

Quantity:

Draper 18 piece bit holder Ref: DR18
Draper 18 piece set.
Includes bit holder and 7 sockets from 6mm to 12mm
No.1 and N0 2 PZTYPE
No. 1 and No. 2 CROSS SLOT
4.5 x 5.5 PLAIN SLOT
T15 x T20 TX- STAR
No. 2 x No. 3 PZTYPE
No. 2 x No. 3 CROSS SLOT
6.0 x 6.5 PLAIN SLOT
T25 x T30 TX-STAR
1/4" HEX x 1/4" SQUARE

In Plastic Case

Price: £9.00 (£10.58 Including VAT at 17.5%)

Quantity:

Draper self grip pliers Ref: dr35371
Draper straight jaw self grip pliers.
190mm

Price: £7.00 (£8.23 Including VAT at 17.5%)

Quantity:

Draper 10 piece set Ref: drap33667
Draper Expert 1/2" drive 10 piece Hi-Torq Metric impact sockets.
6 point socketsforged from chrome vanadinm steel hardened, tempered and chemically blacked for corrosion protection.
Hole for accessory spring-loaded ball.
for use with air, electric or manual impact wrenches.
Contents: 10, 11, 12, 13, 14, 15, 17, 19, 21 and 22mm sockets on a rail.

List price £31.84 plus VAT
ONLY 1 AVAILABLE
Price: £25.00 (£29.38 Including VAT at 17.5%)

Quantity:

Draper flexible sockets Ref: drap63373
Draper set of 10 1/4" drive flexible metric sockets on a rail.

Bi-hexagon sockets manufactured from chrome vanadium steel hardened and tempered with a chrome plated finish.
The flexible head allows sockets to be positioned through 180 degrees for work in awkward locations.
Contents: 5, 5.5, 6, 7, 8, 9, 10, 11, 12 and 13mm sockets on a rail.

List price £33.90 plus VAT
ONLY 2 AVAILABLE
Price: £25.00 (£29.38 Including VAT at 17.5%)

Quantity:

Draper adjustable wrench Ref: drapadjw
Draper Value Adjustable wrench.
Drop forged carbon steel.
Chrome plated
Price: £5.00 (£5.88 Including VAT at 17.5%)

size

Quantity:

Draper Expert ratchet comb spanner Ref: drapgw
Draper Expert ratchet combination spanner

ONLY I OF EACH SIZE LISTED AVAILABLE

size

Quantity:

Best Sellers

New Products